Downloads FAQs EV/Lux/FootCandle Conversion Chart Instruction Manual/User Guide Download Battery Selector Chart Service Information Register Contact Us

Downloads

DTS Software for MAC and Windows C-7000 Series Software Guides C-700_800 Series Software Guides C-700_800 Series Utility for MAC and Windows Spectrometer (color meter) Firmware Light Meter Firmware

Data Transfer Software & USB Driver

Sekonic's Data Transfer Software is used to create and edit camera exposure profiles and then transfer them to your L-858 series, L-758 series or L-478 series for extremely accurate control of exposure. Along with the sensor's dynamic range, it records the unique variations of your digital camera, such as the effects of shutter speed and aperture mechanisms as well as the characteristics of the lens in use. The adjustable graph function makes quick work of viewing and modifying profiles.

TEST DRIVE: Download sample set of images to use with Sekonic Data Transfer Software

DTS Tutorial Videos

See how quick and easy it is to use!

Ryan Walters on Cine

Joe Brady on Still Photography

Get flash to see this player

Macintosh OSX Windows

Data Transfer Software

IMPORTANT!

Customers who already installed Data Transfer Software version 5.0 or later, update the software by using "UPDATE" function in Data Transfer Software. UPDATE INSTRUCTIONS
Customers who already installed DTS version 4.0 or earlier, before installing new version below, completely remove any previous versions.
Please see the Software Guide for installation.
Turn off firewalls and anti-virus programs during the installation process.
Version 5.11 is newly compatible with L-858 series in addition to L-758 and L-478 series. Version 5.01 or earlier is compatible with only L-758 and L-478 series.
Customers, who use mac OS10.14 Mojave, see this instruction and note.

APFS Restrictions

Aplicable Product

Version 5.11 for OSX 10.14 Mojave compatible with L-858D, L-758 and L-478 series

Download DTS ver. 5.11 for OSX 10.10 - 10.14 (9.23 MB)
Software Guide (4.4 MB)

Version 4.03 for OSX 10.7 to 10.9 compatible with L-758 and L-478 only

DTS v. 4.03 compatible with
OS 10.7, 10.8, 10.9 (8MB)
Software Guide (3.7 MB)

Sign up for notification of compatibility

Requirements of Version 5.10

Software	Data Transfer Software (this software)
Software	USB Driver
OS ^*1	MAC OS X 10.10 Intel CPU MAC OS X 10.11 Intel CPU mac OS v10.12 CPU
Models	Macintosh with a standard USB interface ^{2 3}
CPU	Intel CPU (compatible with operating conditions of OS) ^*2
RAM	Compatible with operating conditions of OS
Hard disk space	Same as above
Display	Screen resolution: At least 1024 x 768, Color quality: At least 16-bit

*1 If you are using a Macintosh computer, be sure to use the Macintosh version of the software. Operation of the Windows version is not guaranteed when running in Virtual PC for the Mac.

*2 Intel CPU (except Core 2 Duo and earlier) dedicated. 68k computers and Power PCs not supported.

*3 Please note the following:
     - The operating system must be the one pre-installed on the computer.
     - Proper operation may not be possible on certain Macintosh models and configurations.
     - Proper operation is not guaranteed on a Macintosh with an upgraded operating system
       or an add-on USB interface.
     - Proper operation is not guaranteed over connections through a USB hub.

Data Transfer Software

IMPORTANT!

Customers who already installed Data Transfer Software version 5.00, update the software by using "UPDATE" function in Data Transfer Software. However, when updating from version 5.01 with Windows 10, User Account Control may block the updating. In this case, please uninstall the old version 5.01, and install new version 5.11.
Customers who already installed DTS version 3.093 or earlier, before installing new version below, completely remove any previous versions.
Please see the Software Guide for installation.
Turn off firewalls and anti-virus programs during the installation process.
Version 5.10 is newly compatible with L-858 series in addition to L-758 and L-478 series. Version 5.01 or earlier is compatible with only L-758 and L-478 series.

Version 5.10 for Windows 7, 8.1 and 10 compatible with L-858, L-758 and L-478

Download DTS 5.10 (42.3 MB)
Software Guide (4.6 MB)

Requirements

Software	USB Driver ^*1
Software	Data Transfer Software (this software)
OS	Windows® 7 (32/64-bit version) ^1 Windows® 8.1 (32/64-bit version) ^2 Windows® 10 (32/64-bit version) ^*3
Models	PC with a standard USB interface ^*4
CPU	Compatible with operating conditions of OS
RAM	Same as above
Hard disk space	Same as above
Display	Screen resolution: At least 1024 x 768, Color quality: At least 16-bit

*1 Home Premium / Professional / Ultimate, SP1 upward.

*2 Windows 8.1 / Windows 8.1 Pro / Windows 8.1 Enterprise.

*3 Home / Pro / Enterprise.

*4 Please note the following:
     - The operating system must be the one preinstalled on the computer.
     - Proper operation may not be possible on certain computer models and configurations.
     - Proper operation is not guaranteed on a computer with an upgraded operating system
       or an add-on USB interface, a homemade computer, a shop-made computer, or in an
       emulator environment (such as Virtual PC).
     - Proper operation is not guaranteed over connections through a USB hub.