Downloads

Looking for the latest firmware, software or manuals? Select your meter from the drop-down below for the latest updates.

 

 

Looking for Downloads for Radio Transmitters?
RT-3PW | RT-20PW | RT-32CTL | RT-EL/PX

 

Select your products:

Exposure Meters

Title:
Sekonic L-478DR-U-EL LiteMaster Pro for Elinchrom Skyport System Light Meter

CAT#
SKU:
401-475

FIND A DEALER

Key Features

Flash Power Control & Radio Triggering With Elinchrom EL-Skyport

Incident Metering for Ambient & Flash

Reflected 5 degree spot metering with optional viewfinder attachment

Cine Setting: Frame Rate & Shutter Angle

2.7" Color Touchscreen LCD

Flash Analyzing Function

Filtration Compensation Mode

Illuminance/Luminance Measurements

Contrast Function & Memory Mode

Custom Exposure Profiles & Calibration

See More
Software

Data Transfer Software for MAC

IMPORTANT!

  1. Customers who already installed DTS version 5.0 or earlier, before installing new version below, completely remove any previous versions and see this instruction and note.
  2. Please see the Software Guide for installation.
  3. Turn off firewalls and anti-virus programs during the installation process.
  4. Compatible with L-858 series, L-478 series and L-758 series.
  5. If you fail installing the latest Data Transfer Software / Utility Software due to Gatekeeper by Apple inc. Please see this instruction.
     

APFS Restrictions

Depending on the specification of the APFS file system, file display may not be in alphabetical order. Therefore, when saving multiple images in the same folder, it is difficult to find the necessary image for profile creation. 

Please kindly create a subfolder and manage related images by combining relevant images for each profile. 

Applicable Product

  • Mac Computer Products installed SSD model (mac OS 10.13 High Sierra and later)
  • A Devise formatted as APFS (mac OS 10.12 Sierra and later)

Version 6.0 for OSX 10.15 Catalina compatible with L-858D, L-758 and L-478 series

Download DTS ver. 6.0 for OSX 10.13 - 10.15 (9.7 MB)
Software Guide (4.4 MB)

 

Sign up for notification of compatibility

Privacy policy: please note that your details will not be passed on to any third parties.

 

Requirements of Version 6.0

Software Data Transfer Software (this software) 
USB Driver 
OS *1 MAC OS X 10.13
MAC OS X 10.14
MAC OS X 10.15
Models Macintosh with a standard USB interface *2 *3
CPU Intel CPU (compatible with operating conditions of OS) *2
RAM Compatible with operating conditions of OS
Hard disk space Same as above
Display Screen resolution: At least 1024 x 768
Color quality: At least 16-bit

*1 If you are using a Macintosh computer, be sure to use the Macintosh version of the software. Operation of the Windows version is not guaranteed when running in Virtual PC for the Mac.

*2 Intel CPU (except Core 2 Duo and earlier) dedicated. 68k computers and Power PCs not supported.

*3 Please note the following:
     - The operating system must be the one pre-installed on the computer.
     - Proper operation may not be possible on certain Macintosh models and configurations.
     - Proper operation is not guaranteed on a Macintosh with an upgraded operating system
       or an add-on USB interface.
     - Proper operation is not guaranteed over connections through a USB hub.
     -A drive capable of reading a CD-ROM is required to install the software from the CD-ROM.
 


Data Transfer Software for WINDOWS

IMPORTANT!

  1. Customers who already installed Data Transfer Software version 5.00, update the software by using "UPDATE" function in Data Transfer Software. However, when updating from version 5.01 with Windows 10, User Account Control may block the updating. In this case, please uninstall the old version 5.01, and install new version 5.11.
  2. Customers who already installed DTS version 3.093 or earlier, before installing new version below, completely remove any previous versions.
  3. Please see the Software Guide for installation.
  4. Turn off firewalls and anti-virus programs during the installation process.
  5. Version 5.10 is newly compatible with L-858 series in addition to L-758 and L-478 series. Version 5.01 or earlier is compatible with only L-758 and L-478 series.

Version 5.10 for Windows 7, 8.1 and 10 compatible with L-858, L-758 and L-478

Download DTS 5.10 (42.3 MB) Software Guide (4.6  MB)

 


Requirements

Software USB Driver *1
Data Transfer Software (this software)
OS

Windows® 7 (32/64-bit version) *1 Windows® 8.1 (32/64-bit version) *2 Windows® 10 (32/64-bit version) *3

Models PC with a standard USB interface *4
CPU Compatible with operating conditions of OS
RAM Same as above
Hard disk space Same as above
Display Screen resolution: At least 1024 x 768, Color quality: At least 16-bit

 

  1. Home Premium / Professional / Ultimate, SP1 upward.
  2. Windows 8.1 / Windows 8.1 Pro / Windows 8.1 Enterprise.
  3. Home / Pro / Enterprise.
  4. Please note the following:      
  • The operating system must be the one preinstalled on the computer.      
  • Proper operation may not be possible on certain computer models and configurations.      
  • Proper operation is not guaranteed on a computer with an upgraded operating system or an add-on USB interface, a homemade computer, a shop-made computer, or in an emulator environment (such as Virtual PC).      
  • Proper operation is not guaranteed over connections through a USB hub.

 

 

Firmware

DigitalMaster L-478 Series Firmware

IMPORTANT!:

  1. To update the firmware of your meter, install the Data Transfer Software first.
  2. Please see the Software Guide for installation under the software tab above.

  3. Go to the "Update Setting" tab on the screen of Data Transfer Software, and follow the instructions.

See the Release Note here for firmware version.

Manuals
Quick Start Videos
 
00:00