LITEMASTER PRO L-478 SERIES | Touch it!

Flash Power Control

L-478DR-U LiteMaster Pro (for PocketWizard®)

Get ready for this, because it will change your life for the better! You can now control the power of remote flash units wirelessly, thanks to built-in PocketWizard® wireless technology. Think of all the time you'll save not running over to the lights, and how quickly you can adapt to new lighting ratios - all on the L-478DR touchscreen!

Touch the sliders on your screen to adjust power levels of Nikon® or Canon® Speedlights mounted on PocketWizard FlexTT5® transceivers or select studio flash units connected to ControlTL receivers. Switch Zones ON/OFF to measure remote flashes separately for precise ratios.

The L-478DR also incorporates PocketWizard's standard channels (1 - 32) and Quad Zone capability to trigger any flash (or camera!) with a PocketWizard connected to it, including those with PocketWizard modules built-in. Imagine a portrait session where you get more natural facial expressions from your subject by triggering your camera with your light meter. Cool, right? And that's just the beginning of a whole world of wireless control possibilities.

Flash Power Control

 

L-478DR-U-EL LiteMaster Pro (for Elinchrom Skyport)

Flash triggering and light metering will never be the same again. Sekonic has teamed up with Elinchrom to incorporate Skyport radio triggering and power control into the L-478DR-U-EL meter. Now you can adjust the power of your lights and trigger them right from the palm of your hand. No running around to adjust lights. No break in your workflow. No loss of contact with your subject.

Simply tap the screen to adjust the power level in 0.1 stop increments. Press the measuring button and the F-number value appears in the central area of the screen and over the Group button. Reading values are maintained for each group reading making adjusting lights for the perfect ratio a snap.

If you are a videographer, you can use the modeling lights of Elinchrom flashes as a continuous light source for filming and the L-478DR-U-EL has a separate power control screen for them as well.

Triggering and power control with the L-478DR-U-EL is compatible with all Elinchrom flashes that use the EL-Skyport triggering system.

L-478DR-U-EL

For more information about compatible Elinchrom products visit www.elinchromus.com

 

L-478DR-U-PX LiteMaster Pro (for Phottix Strato, Channel/Group triggering only)

Flash triggering and light metering with the greatest of ease. Sekonic has teamed up with Phottix to incorporate Strato II control into the L-478DR-U-EL meter. Now you can trigger and measure your lights singly or in groups right from the palm of your hand.

Simply tap the screen to select a single group or combination of groups to read and press the measuring button. The F-number value appears in the central area of the screen and over the Group button. Reading values are maintained for each group reading making adjusting lights for the perfect ratio a snap.

Group selection and triggering with the L-478DR-U-PX is available for hot-shoe speedlight, or any studio flash connected to Phottix Strato II receiver. Trigging with Phottix flashes includes the Indra350, Indra500 and Mitros+ series flashes designed for use with Canon, Nikon and Sony** cameras.

L-478DR-U-PX

For more information about Phottix products, see www.phottixus.com

L-478DR-U LITEMASTER PRO for PocketWizard
Buy Now Learn More Specifications
L-478DR-U-EL LITEMASTER PRO for Elinchrom Skyport
Buy Now Learn More Specifications
L-478DR-U-PX LITEMASTER PRO for Phottix Strato
Buy Now Learn More Specifications